The following lines is to configure a telnet session:
Vendor Specific
{ VendorIdentifier 0x001095;
GenericTLV TlvCode 54 TlvLength 1 TlvValue 0x01;
GenericTLV TlvCode 106 TlvLength 1 TlvValue 0x01;
GenericTLV TlvCode 107 TlvString "admin"; / * Tlv length = 3 * /
GenericTLV TlvCode 108 TlvString "admin"; / * Tlv length = 3 * /
}
To configure static username/password for web access, you can use the following mibs:
For advanced user:
cmHttpAdvancedUsername.0 (1.3.6.1.4.1.2863.205.1.1.78.4.0)
cmHttpAdvancedPassword.0 (1.3.6.1.4.1.2863.205.1.1.78.5.0)
For user level (local):
cmHttpUsername.0 (1.3.6.1.4.1.2863.205.1.1.78.6.0)
cmHttpUserPassword.0 (1.3.6.1.4.1.2863.205.1.1.78.7.0)
cmHttpAdancedUsername.0
cmHttpAdancedPassword.0
cmHttpUsername.0
cmHttpUserPassword.0
cmHttpIpStackInterfaces.0 (controls and reflects the IP stack interfaces on which the HTTP server is active. Default value 0xE8)
saCmWebAccessAdvancedType.0
saCmWebAccessAdvancedUsername.0
saCmWebAccessAdvancedPassword.0
saCmWebAccessHomeUsername.0
saCmWebAccessHomeUserPassword.0
saCmWebAccessUserIfLevel.adv-user.lan
saCmWebAccessUserIfLevel.adv-user.rf-cm
saCmWebAccessUserIfLevel.home-user.lan
saCmWebAccessUserIfLevel.home-user.rf-cm
CGA2121
enterprises.46366.4292.77.1.7.3.0 (tchCmWebAccessAdvancedUsername.0 )
enterprises.46366.4292.77.1.7.4.0 (tchCmWebAccessAdvancedPassword.0 )
enterprises.46366.4292.77.1.7.2.1.3.1.1 (tchCmWebAccessUserIfLevel.adv-user.lan)
enterprises.46366.4292.77.1.7.2.1.3.1.2 (tchCmWebAccessUserIfLevel.adv-user.rf-cm)
enterprises.46366.4292.77.1.7.6.0 (tchCmWebAccessAdvancedUsername.0 )
enterprises.46366.4292.77.1.7.7.0 (tchCmWebAccessAdvancedPassword.0)
enterprises.46366.4292.77.1.7.2.1.3.10.2 tchCmWebAccessUserIfLevel.adv-user.rf-cm
enterprises.46366.4292.77.1.7.2.1.3.10.1 tchCmWebAccessUserIfLevel.adv-user.lan
======